October 2012

A Snowflake-Shaped Magnetic Field Holds Promise for Taming Harsh Fusion Plasmas

Recent experiments have confirmed the great potential of a novel plasma-material interface concept.

Click to enlarge photo. Enlarge Photo

Image courtesy of Vlad Soukhanovskii

The National Spherical Torus Experiment Device at Princeton Plasma Physics Laboratory (left), and a schematic of magnetic field lines in the snowflake divertor configuration (right).

The Science

Heat escaping from the core of a twelve-million degree nuclear fusion plasma device was successfully contained by a snowflake-shaped magnetic field to mitigate its impact on device walls.

The Impact

One of the grand challenges of the magnetic fusion research is to “tame the plasma-material interface”—to develop an interface between the hot plasma in the nuclear fusion reactor and the low-temperature material wall. The novel snowflake configuration diverts and dissipates heat lost from the high-temperature core plasma, thus alleviating thermal loads on the material wall.

Summary

Strong magnetic fields shape the hot plasma in the form of a donut in a magnetic fusion plasma reactor called a tokamak. Confined plasma particles move along infinite magnetic field lines inside the tokamak. Some particles and heat, however, tend to escape because of transport and magnetohydrodynamic plasma instabilities. A separate part of the vacuum vessel called a “divertor chamber” is used to divert away and collect lost heat and particles. If the plasma incident on the divertor surface is too hot, melting of the plasma-facing components and loss of coolant can occur. Under such undesirable conditions, the plasma-facing component lifetime would also be an issue, as they would tend to erode too quickly. The snowflake divertor concept was developed theoretically by Dmitri Ryutov and colleagues within the Fusion Energy Sciences Program at Lawrence Livermore National Laboratory (LLNL). The experiments led by LLNL scientists on the National Spherical Torus Experiment (NSTX) and DIII-D tokamak user facilities at Princeton Plasma Physics Laboratory and General Atomics, respectively, confirmed that all predicted magnetic properties could be realized without any additional hardware. The experiments at NSTX and DIII-D demonstrated a drastic reduction of heat load on divertor plasma-facing components and compatibility with high performance high confinement core plasma regimes. These, as well as other on-going experimental and numerical modeling efforts in USA, Switzerland, Italy and China, provide support to the snowflake divertor configuration as a viable plasma-material interface for future tokamak devices and for fusion development applications.

Contact

V. A. Soukhanovskii
Lawrence Livermore National Laboratory
vlad@llnl.gov

Funding

Office of Science Fusion Energy Sciences (FES) program

Publications

Ryutov, D., Geometrical properties of a snowflake divertor Phys. Plasmas 14, 064502 (2007).

Ryutov, D. et al., The magnetic field structure of a snowflake divertor, Phys. Plasmas 15 (2008) 092501.

Soukhanovskii, V. et al., Taming the plasma-material interface with the snowflake divertor in NSTX, Nucl. Fusion 51 (2011) 012001.

Soukhanovskii, V. A. et al., Snowflake divertor configuration studies  in NSTX, Phys. Plasmas 19 (2012) 082504.

Allen, S. L. et al., Initial Snowflake Divertor Physics Studies on DIII-D, Paper PD/1-2, IAEA FEC 2012.

Related Links

DIII-D user facility: https://fusion.gat.com/global/DIII-DExternal link

NSTX user facility: http://nstx.pppl.gov/External link

http://www.rdmag.com/award-winners/2012/08/high-performance-tokamak-exhaustExternal link

https://str.llnl.gov/OctNov12/ryutov.htmlExternal link

http://www.aps.org/units/dpp/meetings/vpr/2010/upload/hp-soukhanovskii.pdfExternal link

Highlight Categories

Program: FES

Performer/Facility: DOE Laboratory, Industry, SC User Facilities, FES User Facilities, DIII-D, NSTX

Last modified: 3/18/2013 10:29:28 AM